Specifications EDDHA-Fe 6%:
Good quality and resonable price
ISO approved
15 years' factory-based gold manufacturer
largest export team
Advantages of QCC Brand 1. ISO approved 2. 15 years' factory-based gold supplier 3. largest export team in China 4. strong registration team 5. registered in more than 30 countries 6. 18 self-owned patents Detaied Information of EDDHA-Fe 6% It is used as an effective solution to correct iron deficiencies and for the maintenance of iron levels in crops growing in highly acidic or alkaline soils. It is particularly effective in highly alkaline soil conditions. It is used in all crops that respond to supplemental applications of iron and good compatibility with all agricultural inputs such as fertilizers and pesticides. Specification of EDDHA-Fe 6%
Component | Range | Typical |
Appearance | Red Brown Powder | Red Brown Powder |
Ortho:Ortho | 4.8 | 4.8 |
Cheated Percentage | 98-99% | Full Cheated |
Fe | 6%±0.4 | 6.22% |
PH | 7-9 | 7.17 |
solubility(20°C) | 60g/L | 60g/L |
Storage & Handing Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Oxidants should be stored separately and avoid mixing reservoir. Equipped with the appropriate variety and quantity of fire equipment. Storage areas should be equipped with appropriate materials asylum leakage. Packing In 25kg pp bags; Packing with pallets 16MT/20’FCL Application Recommendations EDDHA Fe 6% works best when crops are not under moisture stress and are supplied with adequate major nutrients. EDDHA Fe 6% is most effective when applied at crop stages where demand for iron is most critical and when the crop is most responsive to iron applications. If this product is to be applied as a liquid either on the soil or on the foliage, it is NOT necessary to pre-mix with a small amount of water. Instead, add this product directly into the solution tank slowly and maintain good agitation. Agitation and stirring should continue until the product is fully dissolved. As a matter of precaution, for tank-mix applications with other agricultural inputs such as fertilizers and pesticides, it is advisable to prepare a sample mixture of these products to ensure good compatibility before application. 1. EEDHA Fe 6% can be applied around the plants as a powder, liquid spray, and liquid injection or through drip irrigation systems When applied as a powder, it should be washed in or irrigated with water within 4 hours of application. When applied as a spray onto the soil, make sure that coarse spray nozzles are used and that adequate volume of water is used to wet the soil thoroughly. When applied as a soil injection, it should be done at less than 1 meter apart. 2. General Rates of Application The rates recommended below represent the upper and lower limits of the range. Actual rate to be applied depends on size of the plant and the level of need as determined by the level of deficiency of iron.
Crops | Application Rates |
Apples and stone fruits | 28g—140g per tree |
Citrus, Avocados, Mangoes | Young tree 500g—700g per 100m2 Mature tree 200g—500g per tree Annual maintenance 100g—150g per tree |
Berries | 3.7g—7.5g per meter of row in a band or as a side dressing |
Tomatoes, Cotton, Legumes, other vegetables and root crops | 1kg—2kg per hectare as maintenance or 2kg—5kg per hectare if chlorotic. Apply prior to planting or when deficiency symptoms appear. |
Ornamental Shrubs | 20g—50g per bush |
Ornamental plants | 60g per 10m2 |
For customers: To save your time and get quotations quickly, please kindly inquire with 1) quantity 2) product packing requirement 3) active ingrediance and its formulation 4) payment term
Contact us if you need more details on Eddha-fe 6%
Foliar Fertilizer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Fertilizer Eddha、Eddha-fe 6 Orthoortho 4.8. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Foliar Fertilizer